STOPAQ POLYESTER

STOPAQ POLYESTER is a pre-impregnated glass-fibre reinforced polyester lining material, curing by means of UV-light

It is used as an additional mechanical protection and UV-protective layer on steel surfaces coated with STOPAQ Wrappingband CZH.
The lining is 2mm thick and will cure under UV-and sunlight and form a hard, impact, chemical and weather resistant surface.

Features:

excellent impact and UV-resistance
wide operating temperature range up to 100 degrees C
fast application
high performance in severe soils

Benefits:

very high resistance to ageing
resists common impacts and indentations
no material waste
safe light spectrum
can be topcoated with STOPAQ GELCOAT

STOPAQ GELCOAT

STOPAQ GELCOAT is a isophthalic polyester resin system.
Standard available in grey and standard viscosity peroxide curing.

It is designed to assist in achieving good adhesion at terminations, top coating material and a touch up for any minor damage to STOPAQ Polyester applications.

Delivered in cans of 2.5kg.
Coverage rate: ca. 2m2/kg